Products

Disclaimer: The provided Product Codes are for reference and internal categorization purposes only. They DO NOT represent official product names or brand names. KTEK Solutions does not claim, under any circumstances, that these Product Codes are  official brand names.

GROUTING INJECTION REINFORCEMENT

(Polyurea silicate and polyurethane based injection resins)

  1. Product Code: GRMP 758

      1. Description: Highly reactive, two component polyurethane (PU) injection resin for strata consolidation.
      2. Fields of Application:
        • Consolidation of fractured rock in underground structures.
        • Permanent consolidation of broken coal in development roadways and longwalls.
        • Sealing against gas and water.
      3. Characteristics & Benefits:
        • Fast reacting material applied where structural strength and flexibility is required.
        • Reacts and expands in volume up to 1.5 times without water contact.
        • Penetrates cracks wider than 0.14 mm.
        • Excellent compressive and bonding strength.
        • Low sensitivity to water.

  1. Product Code: GRMP 368

      1. Description: Highly reactive, fire resistant two component polyurea silicate injection resin for ground consolidation.
      2. Fields of Application:
        • Consolidation of fractured rock in underground structures.
        • Consolidation of coal in development roadways and longwalls.
        • Sealing against gas and water.
        • Repair of concrete cracks.
      3. Characteristics & Benefits:
        • Good adhesion to concrete of 5.0 MPa after 0.5 h.
        • Mixes easily even in low temperatures > 5°C.
        • Compressive strength of >25 MPa.
        • Penetrates cracks wider than 0.14 mm.
        • High structural strength combined with flexibility.
        • Injected material shows good adhesion to damp and low friction substrates.
        • Neither expands its volume with water nor absorbs water.

  1. Product Code: GRMP 364

      1. Description: Highly reactive, two component fire resistant polyurea silicate injection resin for ground consolidation.
      2. Fields of Application:
        • Consolidation of fractured rock in underground structures.
        • Consolidation of coal in development roadways and longwalls.
        • Repair of concrete cracks.
        • Also suitable for underwater application.
      3. Characteristics & Benefits:
        • Penetrates cracks wider than 0.14 mm.
        • Neither expands its volume with water nor absorbs water.
        • Injected material shows good adhesion to wet and low friction substrates.
        • Equally fast reaction in dry or underwater conditions.
        • High structural strength combined with flexibility.
        • Fire resistant (according to DIN4102-B2).

WATER STOPPING

(Polyurethane injection-based resins and foams)

  1. Product Code: WSMP 755

    1. Description: Highly reactive, two component polyurethane (PU) injection foam to stop high volume water ingress and for ground consolidation.
    2. Fields of Application:
      • Permanent stopping of high volume water ingress in underground structures.
      • Suitable for cold water too.
      • Ground consolidation.
    3. Characteristics & Benefits:
      • In contact with water, the product forms a rigid foam.
      • Without the presence of water, the product reacts and forms a hard substance. This is a significant safety advantage, as the material never remains uncured.
      • Short-reaction time.
      • Provides structural strength and rigidity.
  1. Product Code: WSMP 355

    1. Description: One component polyurethane (PU) injection foam to stop small to mid-volume water ingress.
    2. Fields of Application:
      • Stopping of small to mid-volume water ingress in underground structures.
      • Suitable for filling of water bearing voids too.
    3. Characteristics & Benefits:
      • Reacts in moist surroundings.
      • Good bonding to wet surfaces.
      • Forms a flexible foam.

 

FILLING PRODUCT

(Phenolic foams, polyurea silicate foams)

  1. Product Code: FPMP 737

    1. Description: Two component phenolic foam for rapid filling of large voids and cavities.
    2. Fields of Application:
      • Filling of cavities and roof falls in long wall mines.
      • Arand gas sealing.
      • Consolidation of highly fractured strata.
      • Erection of firewall at a safe distance.
      • Consolidation of rock-fall zones in tunnels and mine workings prior to rehabilitation.
      • Rapid construction of stoppings and ventilation seals.
      • Goaf consolidation for long wall take off.
    3. Characteristics & Benefits:
      • Due to a high expansion rate, only small quantities are required for cavity-filling.
      • Instant foaming action, hence leak-proof formwork not required.
      • Sufficient internal compressive strength of the foam allows the long wall support to be extended to the cavity-filled roof.
      • Good compressibility of the foam, adapts readily to strata movement.
      • Low exothermic reaction.


  1. Product Code: FPMP 367 Foam

    1. Description: Highly reactive, two component polyurea silicate injection foam for cavity-filling and ground consolidation.
    2. Fields of Application:
      • Void and cavity-filling, also to avoid water or gas accumulation.
      • Consolidation of fractured rock in underground structures.
      • Consolidation of rock in coal mines.
    3. Characteristics & Benefits:
      • Very fast reacting material.
      • Stable and workable foam structure.
      • Does not expand its volume on contact with water.
      • Shows good adhesion to wet and low friction substrates.
      • Fire resistant (according to DIN4102-B2).

SPRAYED CONTAINMENT MATERIAL

(Polymer coatings and high-foam based materials)

  1. Product Code: SMSF 761 / SMPT 669 / SMPT 769 / SMPT 969

    1. Description: High-foam spraying material, flame retardant and antistatic material for rapid spraying, filling, and sealing.
    2. Fields of Application:
      • Waterproofing, seepage-proofing and wind leakage-proofing of rock walls in roadways, chambers and engine rooms.
      • Lighting of rock walls in roadways, chambers and engine rooms.
      • Anti-corrosion of support nets.
      • Support for leveling roadway.
      • Rapid sealing of underground leveling surface.
      • Underground rock wall surface protection, anti-aging.
    3. Characteristics & Benefits:
      • Strong adhesion with the surface of coal rock body.
      • Excellent sealing performance: waterproof, seepage-proof and wind leakage-proof.
      • Simple construction technology, low dosage of thin layer spraying.
      • Low reaction temperature.
      • Flame retardant, safe and non-toxic.

PUMPABLE BOLTING RESINS

(Polyurea silicate-based injection resins)

  1. Product Code: PRBA 380 / PRBA 384 / PRBA 387

    1. Description: Highly reactive, thixotropic polyurea silicate injection resin for rock- and cable-bolt installation.
    2. Fields of Application:
      • Resin-into-bolt rock bolting at all angles.
      • Bolt-into-resin rock bolting at all angles.
      • For the use of steel and glass fiber bolts.
    3. Characteristics & Benefits:
      • Secure and precise injection due to its thixotropic properties.
      • Flexibility in application due to its unique thixotropic properties and long-distance pumping capacity.
      • Penetrates cracks wider than 0.14 mm.
      • Increased reliability due to its full-size grouting.
      • Mixes easily even in low temperatures > 5°C.
      • High structural strength combined with flexibility.
      • Injected material shows good adhesion to damp and low friction substrates.
      • Neither expands its volume with water nor absorbs water.
      • Keeps people safe during bolting due to its fast curing and strength development.
      • Fire resistant according to DIN 4102-2 Class B2.

SEAL HOLE BAG & DUST SUPPRESSANTS

(Polyurethane-based foam bags, dust suppressant liquids)

  1. Product Code: SH Bag

    1. Description: Polyurethane-based foam bags.
    2. Fields of Application:
      • Sealing of Gas Pumping Boreholes.
      • Sealing of gas pressure measurement holes.
      • Fixing of various types of orifice pipes.
      • Fixing of underground water discharge holes.
      • Filling foundation holes for roads.
      • Sealing of cable holes.
    3. Characteristics & Benefits:
      • Does not shrink after curing.
      • Stable sealing effect.
      • High sealing performance.
      • Prefabricated packaging can meet different needs.
      • Manual operation, simple and fast.
      • Short sealing time and high efficiency.

 

  1. Product Code: DSPD 719

    1. Description: Dust suppressant, for use on all coal stock piles, trains, and trucks.
    2. Fields of Application:
      • Wetting effect – It improves the suppression ability by enhancing the adhesion & spreading abilities of water on coal particles.
      • Crusting effect – It forms a sealed surface which is a half-permanent rainwater-proof film to reduce wind erosion and prevent oxidation.
    3. Characteristics & Benefits:
      • Specially designed dust suppressant, for use on all coal stock piles, trains, and trucks.
      • Preventing the creation of wind borne coal dust.
      • Protecting the environment and saving valuable coal.

FLOCCULANT / WATER TREATMENT CHEMICALS

(Polymer flocculants and dewatering aids)

  1. Product Code: WTCA 781

    1. Description: Water treatment chemical for coal preparation and dressing.
    2. Fields of Application:
      • Tailings settlement.
      • Diamond slime settling.
      • Ore tailings concentrate.
      • Sedimentation of slime water.
    3. Characteristics & Benefits:
      • Produced with a new process – UMA technology.
      • Better solid precipitation and compaction.
      • Enables highest degree of clarification of the upper water.
      • Low viscosity.

  1. Product Code: WTCA 783

    1. Description: A filter cake dewatering aid and flocculant for the mineral processing industry.
    2. Fields of Application:
      • Decreased thermal drying costs.
      • Reduced freight charges associated with drier mineral concentrates.
      • Improved solids handleability.
      • Ease of filter cake discharge.
      • Prolonged filter cloth life.
    3. Characteristics & Benefits:
      • Low viscosity liquid.
      • Lowers filter cake moisture.
      • Can be used for sewage settlement and sludge dehydration.
      • Adaptable to different sewage and sludge.
      • Can handle a variety of sewage settling and sludge dewatering processes.

TBM CHEMICAL SOLUTIONS

(Tail sealants for tunnel boring machines)

  1. Product Code: TBTS 6 / TBTS 7 / TBTS 800

    1. Description: Tail Sealant / First-fill Tail Sealant / Fire-resistant Tail Sealant – for Mechanized Shielded Tunnel Boring Machines (TBM).
    2. Fields of Application:
      • Tunneling with shielded mechanized tunnel boring machines (TBMs) equipped with a tail seal brush system.
    3. Characteristics & Benefits:
      • Excellent consistency and sealing properties.
      • Excellent adhesion to any metal or concrete surfaces.
      • Excellent pumping properties.
      • Very high washout resistance.
      • Fire resistant, no propagation of flames when exposed to sparks or flames.

HIGH STRENGTH WATERPROOFING MATERIAL

(Powdered cementitious waterproofing compounds)

  1. Product Code: WMPR 669

    1. Description: Powdered rigid high-strength waterproofing material made of special cement, admixtures and other base materials, mixed with a variety of active chemicals.
    2. Fields of Application:
      • Suitable for waterproofing of toilet and bath rooms, kitchens, balconies, floors.
      • Underfloor heating in buildings.
      • Waterproofing for non-exposed roofs.
    3. Characteristics & Benefits:
      • Excellent strength and adhesion.
      • Resistant to penetration, cold, heat, acid and alkali.
      • Non toxic, flexible and good impermeability.
      • Strong coating film and fast drying speed.
      • Lasting protection for a variety of substrates.

SOIL CURING MATERIAL

(Soil curing polymers for environmental protection)

  1. Product Code: SCMM S1

    1. Description: A new type of soil curing material for environmental protection, which directly acts on the soil and solidifies the soil.
    2. Fields of Application:
      • Subgrade curing, penetrating and sealing the base pores.
      • Significantly improving the interfacial strength of the cured soil.
      • Effectively solve the problems of low strength.
      • Good adhesion, transparent curing film, water resistance, oil resistance, heat resistance for rapid water stopping.
    3. Characteristics & Benefits:
      • Environmental-friendly and ecologically protective.
      • Polymer group, strong hydrophilic; fast construction, labor saving.
      • Strong penetration, closed curing.
      • Strong adhesion, good weather resistance.

  1. Product Code: SCMM B1

    1. Description: A new type of waterproof soil curing material for environmental protection, which directly acts on the soil and solidifies the soil.
    2. Fields of Application:
      • Subgrade curing, penetrating and sealing the base pores.
      • Significantly improving the interfacial strength of the cured soil.
      • Effectively solve the problems of low strength.
      • Good adhesion, transparent curing film, water resistance, oil resistance, heat resistance for rapid water stopping.
    3. Characteristics & Benefits:
      • Waterproof.
      • Environmental-friendly and ecologically protective.
      • Polymer group, strong hydrophilic; fast construction, labor saving.
      • Strong penetration, closed curing.
      • Strong adhesion, good weather resistance.

 

CONCRETE ADMIXTURES

(Water-reducing agents, set accelerators)

  1. Product Code: CAPH 8126

    1. Description: High-performance water reducing admixture.
    2. Fields of Application:
      • Sprayed concrete.
      • Dramatic reduction in water requirement at equal slump.
      • Improved workability at equal water content compared to a non-treated mix.
      • Increased durability, increased compressive, flexural and bond strengths of concrete.
      • Increased steel strength from the early ages.
      • Reduced permeability.
    3. Characteristics & Benefits:
      • High water reduction capacity over conventional superplasticizers for concrete.
      • Low permeability and high durability for concrete.
      • Flowability for ease of placement and compaction.
      • Optimize curing cycle by shortening curing time or decreasing curing temperature.
      • Eliminate energy required for placing, consolidation and curing.
      • Better rheology properties.
      • Improved surface appearance and concrete quality.


  1. Product Code: CASA 167 / CASA 160

    1. Description: High-performance alkali-free set accelerator (AFA) for rapid production, durable sprayed concrete applications.
    2. Fields of Application:
      • Temporary and permanent rock support in tunnels.
      • Rock support in mining.
      • In poor and wet ground conditions.
      • Slope stabilisation.
      • Also suitable for acceleration of cementitious grouts, such as used in TBM tunnel linings, cement ground injection and foam concrete backfill operation.
    3. Characteristics & Benefits:
      • Quick setting properties allows rapid work progress and the ability to construct thick sprayed concrete linings via layered application during one construction sequence.
      • Unique product formulation provides extremely fast setting coupled with continual early-age strength development.
      • Good long-term strength and durability.
      • Liquid product provides easy handling as well as facilitating accurate addition to the concrete.
      • Very low dust production provides a safe and suitable working environment.
      • Non-aggressive so provides improved working safety, reduced environmental impact and lower handling costs.

WATERPROOF / REPAIR / PROTECTION

(Crystalline waterproofing powders and liquids)

  1. Product Code: WRP 501 / WRP 502 / WRP 503

    1. Description: Crystalline waterproofing powders and liquids for waterproofing, repairing and protection for various structures.
    
    
    1. Fields of Application:
      • Civil buildings such as basements, swimming pools, etc.
      • Buildings for engineering purposes such as subways, tunnels, and catchment wells.
      • Water treatment pools, harbor diaphragm walls, escape routes.
      • Berms, bridge panels, piers, pontoons, etc.
      • Stationary construction joints (new structures).
      • Public buildings (especially skyscraper buildings) such as banks, courts, electricity, communications, radio and television and other office complexes.
      • Waterproofing of external walls.
    
    
    1. Characteristics & Benefits:
      • For WRP 501:

        • Forms crystals in concrete pores – integrates with the structure to form a complete/permanent waterproofing system.
        • Vapor permeable – base layer is able to breathe and will not form vapor pressure.
        • Waterproof layer of high impermeable pressure, with good water resistance, durability, and not aging.
        • Substrate bonds firmly with good compatibility.
      • 
        

        For WRP 502:

        • Effectively reduces shrinkage cracking without affecting structural strength.
        • Improves the chemical resistance of mortar.
        • Effective active substances that can form crystals, remain in “hibernation” state and can be activated when encountering water.
        • Activates and forms water-insoluble crystals.
        • Reduces the absorption of water, sulfate erosion of concrete, and alkali phenomenon.
      • 
        

        For WRP 503:

        • Liquid crystalline waterproof material, applied to the concrete surface, can promote, enhance and improve the concrete.
        • Provides self-healing ability to soil structure cracks.
        • Reduces the permeability of water under pressure.

GROUND CONSOLIDATION CHEMICAL

(Magnesium fluorosilicate hardeners and Two-component epoxy resin mortars)

  1. Product Code: GCC 700

    1. Description: High-grade magnesium fluoro-silicate concrete hardener and dust suppressant agent.
    2. Fields of Application:
      • Suitable for porous, easily absorbed, medium-hard floors.
      • Reacts chemically with concrete floors to enhance ground hardness.
      • Used in construction of warehouses, dairies, airplane hangars, bakeries, commercial garages, tank industry, chemical installation areas, laundries, hospitals, textile mills, breweries, industrial plants, schools, etc.
    3. Characteristics & Benefits:
      • Mostly used for holes.
      • Easy to absorb and enhances the hardness of the ground.
      • Applied to old concrete surfaces to form a breathable, dense, and wear-resistant surface.
      • Improved chemical resistance: acids, alkalis, organic and inorganic reagents, oil and grease.
      • Effectively reduces the cost of floor cleaning and maintenance.
      • Suitable for substrates that will be carpeted.
  1. Product Code: ERM 1438

    1. Description: Two-component epoxy resin bonding slurry for general bonding.
    2. Fields of Application:
      • General construction to bond surfaces.
      • Fixing loose or broken tile and masonry structures.
      • Bond rubber, plastic, foam, and other flexible materials to metal, concrete, or other rigid materials.
      • Decorate rough or uneven surfaces.
      • Fill voids, joints, and gaps.
    3. Characteristics & Benefits:
      • Suitable for top and facade application.
      • Easy to use in areas that are difficult to dry and treat.
      • Strong adhesion; withstands impacts.
      • Different color components help in visual indication of correct mixing to avoid mixing errors.
      • Convenient 2:1 volume mixing ratio.
      • Easy and time-saving mixing.

RELATED ACCESSORIES

(Accessories related to mining and chemical solutions)

  1. Mining Pneumatic Grouting Pump

    A mining pneumatic grouting pump is a device that uses compressed air as a power source, specifically used for grouting, reinforcement, sealing and other processes in mining engineering. The whole set of grouting pump includes:

    1. A pneumatic grouting pump
    2. Suction pipe
    3. Two high-pressure hoses
    4. A mixing gun

       

  2. Injection Pipe M20 x 1 m – 10m

  3. Injection Packer 30 – 150mm Diameter

  4. Injection Gun

  5. Hand Winches

  6. Hoop

  7. Pulley